MaterialsMaterials & 3D Printing

TPU Material: What It Is, Properties and How to 3D Print It

TPU is a flexible, wear-resistant plastic. Learn what its hardness rating means and how to feed, print and troubleshoot TPU filament.

What is TPU material?

TPU, or thermoplastic polyurethane, is a plastic that can stretch, bend and spring back like rubber. Heat lets it soften and flow, so manufacturers can mold it or turn it into 3D printer filament. Choose TPU when a finished part needs to flex repeatedly, cushion a bump or resist rubbing against another surface.

That could mean a foot that keeps a box from sliding, a flexible guard over a corner or a sleeve that grips the handle it slides onto. Those parts ask for different kinds of give. A foot should flatten a little under load. A sleeve needs to stretch over an edge and then recover enough to stay in place. The grade of TPU matters in both cases, and so does the shape of the part.

What is TPU plastic made of?

TPU is a polymer made of chains with two kinds of segments. Soft segments, derived from polyols, allow movement when you bend or pull the material. Hard segments, derived from isocyanates and other building blocks, help the material retain its shape and give it mechanical strength. Manufacturers vary the balance and chemistry so one family of plastics can cover a wide range of hardnesses.

The word thermoplastic describes what happens during heating. TPU can flow when it gets hot enough for processing and solidifies again as it cools. The word elastomer describes how it can behave in use. Stretch it within the working range of the grade and it tends to recover after you release it. This combination is what makes a flexible material work in a printer that builds objects by laying down melted plastic.

You may also see TPE, short for thermoplastic elastomer, on a spool. TPE is the broader family. TPU is one member of it. A spool labeled simply TPE could use a different chemistry, so the settings and surface recommendations from a TPU spool may give a poor starting point.

Label What it tells you What else to check
TPE The material is a thermoplastic elastomer Which polymer family the spool uses
TPU The polymer is a thermoplastic polyurethane The grade, hardness and printer profile
Shore A or Shore D The scale used to describe indentation hardness The letter, test method and actual grade
Flexible filament The spool is marketed for printing parts that bend How well the printer can feed it

What is TPU filament, and what does 95A mean?

TPU filament is a continuous strand sized for a 3D printer’s feed system. The extruder gears push it toward a hot nozzle, where it melts and is laid down in paths. The printed paths cool into a flexible structure. Until it reaches the heated section, though, the strand can behave like a piece of soft cord. How easily it bends on its way into the nozzle is a major part of printability.

Shore hardness measures how readily an indenter presses into the material under a specified test. A higher number on the same scale generally indicates a harder material. The letter matters. Ultrafuse TPU 85A and Prusament TPU 95A are labeled on Shore A. Ultrafuse TPU 64D uses Shore D, a scale used for harder materials, so comparing 64 directly with 85 is misleading.

Treat a spool name as a grade label. Prusament TPU 95A, for example, is sold under a 95A designation and its technical sheet reports a typical result of 92 Shore A by the company’s method. When a part needs a specified hardness, use documented test results and evaluate the finished part. A thin strip and a solid block can behave very differently in your hand even when both come off the same spool.

What is TPU good for?

TPU is useful when a rigid part would scrape, transmit vibration or crack under the sort of movement you expect. Good candidates for a desktop printer include removable feet, protective caps, straps, grip sleeves and trial-fit seals. Commercial TPU formulations also turn up in footwear and industrial components, where manufacturers can choose grades for different kinds of wear, oils or other exposure.

Start with the motion the part needs to make. A thin flap can bend easily. Ribs can direct where it bends. A thicker contact surface can resist being squeezed out of shape, while an open interior can make a bumper compress more easily. If a print feels too stiff, you can often change the shape before buying a softer spool. Print the critical section first and check whether it returns to shape after the intended movement.

For a rigid bracket or a panel that needs to hold its position, look at the 3D printer filament comparison. A PLA vs PETG comparison can help narrow the choice for parts that need to stay firm. A flexible foot and a rigid bracket can even be separate parts, which lets you set the stiffness of each without complicating the print.

How do you 3D print TPU filament?

Can your extruder feed it reliably?

Check the printer documentation for supported hardnesses and any restrictions on automatic loading. Look for a supported path from the drive gears to the hot end. A gap near the gears gives a soft strand room to bend sideways under pressure. A direct-drive system typically has a shorter path, which can make feeding easier. Flexible grades vary widely, so a printer that handles a firm TPU may still struggle with a softer one.

Load the spool so it can unwind freely. A tight bend or a reluctant spool makes the gears pull harder, while pressure at the nozzle still pushes back from the opposite direction. If you hear clicking or find the strand folded beside the gears, stop and check the path and idler tension against your printer’s guidance.

What nozzle temperature, bed and speed should you use?

Begin with the filament maker’s profile for your printer and surface. As one example, Prusa lists a nozzle temperature of 220–240 °C and a bed temperature of 55–75 °C for Prusament TPU 95A. Its data sheet recommends print speed up to 30 mm/s. Those figures belong to that product. A different grade or a separately validated machine profile may call for different settings.

Prusa allows smooth PEI for that grade with a glue-stick separation layer and also lists several compatible alternative sheets. A separator on a suitable surface helps with release. Follow the sheet maker’s guidance because TPU can hold strongly enough to damage some surfaces when a print is peeled off. For a small test, pick a shape with enough contact area to stay down and a corner you can lift when the sheet cools.

How do you reduce stringing and gaps?

A flexible strand compresses under feed pressure. If the tool head changes direction or demands much more material abruptly, that pressure may take time to settle. Print a small sample at a steady speed and check whether the lines are continuous. If the feed is consistent, make one change at a time and compare the result. This helps separate speed problems from temperature, retraction or moisture problems.

Retraction pulls filament back when the nozzle travels. On a soft strand, a large or frequent movement may introduce more feeding trouble. Start with the matched slicer profile and judge how much cleanup the part really needs. A slightly stringy trial piece may still be useful for checking fit and flex. If the surface also looks bubbly or rough, check the condition of the spool before tuning retraction further.

Does TPU filament need drying?

The answer depends on the formulation and storage. Prusa says its TPU 95A normally requires no drying but recommends at least four hours at 60 °C if moisture is causing trouble. Follow the limits published for your own filament and storage equipment. Keep a dried spool sealed while it is waiting for the next job.

Wet filament can produce bubbles as it reaches the heated nozzle. That can leave a rough surface or irregular lines. A blocked nozzle, excessive nozzle temperature and uneven feeding can also cause defects. If a dried spool still leaves missing lines, inspect the feed path and look for a consistent bead during loading. If material comes out evenly and the first layers lift, return to bed preparation and the first-layer profile.

How do you design a TPU print that bends in the right place?

Isolate the flexible section and decide which surfaces must keep their dimensions. A cap with a thin lip can stretch over an opening while a thick rim helps it stay round. A bumper can use a rounded contact face so it compresses smoothly when it hits. If a strap keeps tearing at the same spot, inspect the junction where its narrow section meets its anchor. A smoother transition can spread the force over more material.

Layer direction matters because a printed part is built from tracks and seams. Arrange the shape so that repeated pulling goes along continuous paths when practical. Print a specimen with the same orientation and thickness as the part it represents. A spool’s technical sheet can help screen materials, but a strap reinforced by its perimeter can respond differently from a test strip.

If a prototype bends enough but takes a permanent set under a steady squeeze, check the grade’s compression-set information. Compressed feet and seals spend much of their service under load, where recovery matters as much as the feel of a quick squeeze. For profiles where the part should bend slightly and retain more rigidity, compare the use cases in the PETG material guide before committing to a soft grade.

Frequently asked questions

What does TPU stand for in 3D printing?

TPU stands for thermoplastic polyurethane. In filament form, it is a heat-processable plastic that can produce prints that flex and spring back.

Can a Bowden 3D printer use TPU filament?

Some Bowden printers can feed a firmer TPU if the filament path is well constrained. Check the printer and spool guidance, since very soft grades are especially prone to buckling.

What does 95A mean on TPU filament?

It is a nominal hardness on the Shore A scale. It describes resistance to indentation, while the shape and wall thickness of a printed object also influence how readily it bends.

Do I have to dry TPU before printing?

That depends on the grade, storage and symptoms. Use the spool maker's drying instructions if you see signs of moisture such as bubbling or a rough finish.

Is TPU plastic waterproof?

Water resistance is grade-dependent, and printed layers can leave paths for liquid. A TPU part intended to hold water needs a suitable grade and a design checked under its actual conditions of use.

Sources

  1. Thermoplastic Polyurethane (TPU)
  2. Flexible materials
  3. Prusament TPU 95A material guide
  4. Prusament TPU 95A technical data sheet
  5. Flexible Filaments

More in Materials