Tool
3D Printing Filament Comparison
Choose two or three filaments to see how they compare on the properties that matter when you pick a material.
Compare filaments
| Property | PLA | PETG | ABS | ASA | TPU | Nylon | Polycarbonate |
|---|---|---|---|---|---|---|---|
| StrengthRelative toughness and tensile strength | 3/5 | 3/5 | 3/5 | 3/5 | 2/5 | 4/5 | 5/5 |
| Heat resistanceRelative; typical heat deflection temperature in brackets | 1/5 (~55 °C) | 2/5 (~70 °C) | 3/5 (~95 °C) | 3/5 (~95 °C) | 2/5 | 3/5 (~80 °C) | 5/5 (~120 °C) |
| Flexibility1 = rigid, 5 = rubber-like | 1/5 | 2/5 | 2/5 | 2/5 | 5/5 | 3/5 | 2/5 |
| Nozzle temperatureTypical range | 190–220 °C | 220–250 °C | 220–250 °C | 235–255 °C | 210–230 °C | 240–270 °C | 260–310 °C |
| Bed temperatureTypical range | 50–60 °C | 70–85 °C | 95–110 °C | 90–110 °C | 40–60 °C | 70–90 °C | 100–120 °C |
| Difficulty1 = beginner friendly, 5 = expert | 1/5 | 2/5 | 3/5 | 3/5 | 4/5 | 4/5 | 5/5 |
| In short | Easiest to print and stiff, but softens in a hot car. | Tougher and more heat resistant than PLA; can string. | Heat resistant and tough; warps without an enclosure and gives off fumes. | Like ABS but UV resistant, so it suits outdoor parts. | Rubber-like and flexible; print slowly, ideally with a direct-drive extruder. | Strong, tough and wear resistant; absorbs moisture and must be kept dry. | Very strong and heat resistant; needs high temperatures and an enclosure. |
Typical ranges published by filament makers. Brands differ, so check the label on your spool.